![Monaco DYNASTY 2006 Скачать руководство пользователя страница 326](http://html1.mh-extra.com/html/monaco/dynasty-2006/dynasty-2006_user-manual_1824579326.webp)
326 • SECTION 10 — CHASSIS INFORMATION
DYNASTY 2006
Steering Spindles
The steering spindles attach to the front axle and pivot
on the kingpin. The wheel end assembly and brake system
attach to the spindle. There are upper and lower lubrication
points for the kingpin. The drag link attaches to the roadside
spindle. After initially lubricating the roadside and curbside
kingpins, rotate the steering assembly lock to lock (full left
to right) then move assembly back to center. This purges
any remaining air pockets. Continue lubricating the kingpins
until new grease purges with no air pockets. Greasing
interval is every six months or 5,000 miles.
Control Arm Bushings
Control arms align the axles perpendicular with the frame. The panhard bar controls side to side motion of the
axles in the frame. Control arm bushings and panhard bar bushings do not require lubrication.
STEERING GEAR
Maintain the grease pack behind the output shaft’s dirt and water seal as a general maintenance procedure at
least twice a year. The grease fi tting is provided in the housing trunnion. Use NLGI grade 2 or 3 multipurpose
chassis lube and use only a hand operated grease gun on the fi tting. Add grease until it begins to extrude past the
sector shaft dirt and water seal.
Power steering is provided by using hydraulic pressure to
assist rotating the output shaft of the steering gear. Located at
the end of the input shaft of the steering gear is poppet valve
and worm drive. The poppet valve directs the hydraulic fl uid
pressure to a type of spool. The worm drive threads in the
center of the spool. When in the center position, pressurized
hydraulic fl uid bypasses the spool. When a turn is made, the
poppet valve shifts to one direction or the other, directing
the hydraulic pressure to one side of the spool depending on
turning direction. The hydraulic fl uid is then cooled before
returning to the reservoir.
Inspect
for signs of leakage when performing fl uid level
checks.
Changing the hydraulic fi lter in the engine compartment at
regular intervals will help ensure trouble-free operation.
Upper
Lubrication
Points
Lower
Lubrication
Points
090414
Zerk Fitting:
Located under
dust cap.
Steering Box - Back
090403b
Содержание DYNASTY 2006
