Monaco DYNASTY 2006, Руководство пользователя

Страница: 167 / 384

DYNASTY 2006 EQUIPMENT — SECTION 5 • 167
Door Bell
The door bell button is located next to the entry door
on the outside of the motorhome. The two-tone door
bell chime is located in the vanity cabinet just under the
sink. A momentary switch completes the 12 Volt DC
circuit, activating electromagnets to pull a plunger down
against a measured resonant metal plate and compress a
coil spring. When the electromagnet releases, the spring
forces the plunger up against another resonant metal
plate with a different tone.
NOTE:
If the chimes seem sluggish, the plungers can
be cleaned with compressed air. Never oil
chime plungers.
If the chime fails to work, check the fuse at the bedroom ATO fuse panel. If the fuse immediately blows again,
there may be a short in that circuit, and consulting a technician is recommended.
KEYLESS ENTRY
Entry and bay door locks can be operated using the touch keypad located adjacent to the entry door. Three lock
codes are pre-assigned and are unavailable for future use as unlock codes.
• 555 -
Locks entry door and bay doors if connected.
• 557 - Locks entry door and bay doors if connected.
• 559 -
Locks entry door and bay doors if connected
and arms keypad (fl ashes momentarily once every
15 seconds).
NOTE:
Due to preassigned codes, number(s) 5/6
cannot be used at the beginning of a new
unlock code.
Unlock codes should be personalized upon receiving the motorhome. Unlock codes have two categories:
Master and Optional codes . Master code enables motorhome entry and auxiliary control. Deleting, adding or
changing of Optional codes are performed at the Master code level.
INFORMATION:
Consult the OEM manual for further information.
•
To lock:
Shut the door. Enter one of the three lock codes to lock the entry door and bay doors, if
connected.
•
To unlock:
Enter Factory Default Master code or a three to eight digit personalized Unlock code, if
programmed.
Door Bell Chime: Face plate removed.
031081b
030883b