Monaco DYNASTY 2006, Руководство пользователя

Страница: 192 / 384

192 • SECTION 5 — EQUIPMENT DYNASTY 2006
ALADDIN™ SYSTEM
The Aladdin™ system is designed to monitor various chassis and house systems, providing up to date
and accurate information. This allows the operator to make informed decisions regarding operations of the
motorhome.
Chassis information comes from the engine and transmission electronics. House information is obtained from a
number of sensor modules distributed throughout the motorhome.
The Aladdin™ system also automatically selects one of a number of cameras that can be used to aid the
driver. When the system is turned ON, placing the transmission in reverse will cause the backup camera to be
selected. For units equipped with see vision side cameras, activating a turn signal will select the corresponding
side view camera.
Joystick Module:
The Joystick Module is the operator interface to the Aladdin™ system through
the monitor display. Multiple joystick modules may be attached to the Aladdin™.
Each joystick module allows the operator to control cursor movements. Pushing the
joystick to the right typically enters a menu item, pushing the joystick left typically
takes the operator back to the previous menu. Pushing the joystick up or down enables
the operator to scroll through or change information. An LED provides system-on
power indication. When the joystick is moved, the LED briefl y turns off (blinks),
indicating the joystick command has been transferred to the Aladdin™ controlled
module. During normal operation, the LED blinks approximately every four seconds.
Operations
The Aladdin™ is turned on either with the motorhome ignition switch or the joystick. The Aladdin™ will power
down when ignition is turned off, unless the operator selects the Aladdin™ to remain on.
Main Menu:
When the Aladdin™ is powered up, the main menu appears. The operator
can choose any item by pressing the joystick up or down. An arrow
indicates the current menu item. Pressing the joystick right will select that
menu item. Pressing the joystick left goes to the previous screen.
NOTE:
Interior 12 Volt DC house power must be on for the
Aladdin™ screen to be displayed.
Camera Select (with optional See Vision):
The Aladdin™ operator can manually select one of the four video cameras that are attached to the Aladdin™.
When the sub menu item is fi rst selected after initial power-up, the Aladdin™ will display the video from each
camera sequentially, changing camera view once every six seconds. A specifi c camera can be manually selected
by moving the joystick up or down.
NOTE:
The backup camera is automatically selected when the transmission is placed in reverse and
the side cameras are activated by the turn signals. If both turn signals are active (hazard
lights) then the backup camera will be selected.
Aladdin Joystick
080377d
Power LED
MAIN MENU
ENGINE/TRANS STATUS
COACH ELECTRICAL STATUS
COACH TANK/MISC STATUS
TRIP METER SELECTION
TIME/ALARM FUNCTIONS
CAMERA SELECT
> SYSTEM OPTIONS
POWER
DOWN ALADDIN