molex FineAdjust APPLICATOR Скачать руководство пользователя | Manualshive

Страница: 3 / 51

background image

FineAdjust Applicator

Doc. No: TM-638004900

Release Date: 09-04-03

UNCONTROLLED COPY

Page 3 of 50

Revision: G

Revision Date: 01-15-13

WARNING

WARNING

Never

use this press or wire processing machine

without guards or safety devices that are intended
to prevent hands from remaining in the die space.

Failure to observe this warning could result in
Severe injury or death.

Do not use

compressed air to clean

this equipment.
The forces created by compressed
air can force debris into the tool.

Failure to observe these precautions may
result in injury or property damage.

WARNING

Always

wear proper ear protection when Operating or servicing this applicator.

CAUTION

The Molex applicators are designed to operate in presses with standard shut heights of 135.80mm (5.346”).
Installation in crimp presses with other than standard shut heights can cause severe tool breakage. It is advisable that before
installation, a check of the shut height be performed. Molex will not be liable for any damages as a result of installation in a
crimp press with nonstandard or improperly set shut height.
Failure to observe these precautions may result in injury or property damage.

CAUTION

Never

perform any service or maintenance other than as described in this manual.

Never

modify, alter or misuse the equipment

Molex crimp specifications are valid only when used with Molex terminals, applicators and tooling.
Failure to observe this precaution may result in injury and property damage.

Tooling Technical Assistance

Molex offers tooling technical assistance for customers who may need some guidance for tooling adjustments. This support can
be obtained by calling either of the two numbers listed below and asking for the Molex Tooling Group.
Call Toll Free 1-800-786-6539 (US) 1-630-969-4550 (Global).

This assistance is limited to the operation and set-up of a customer’s Molex Press. Questions with regard to Molex connector
products or how to identify the proper tooling and/ or tooling documentation should be directed to your local Molex personnel or
Customer Service Representative.

When calling for service on the press a copy of the

Tooling Manual

and Specific

Applicator Tooling Specification Sheet

should be

present and a person that is familiar with the applicator should be present. Be sure the following information is supplied:

1.

Customer name

2.

Customer address

3.

Person to contact such as (name, title, e-mail, and telephone number

4.

Applicator order number (Lease number also if applicable)

5.

Serial number (Lease number also if applicable)

6.

Molex Connector product order number

7.

Urgency of request

8.

Nature of problem

Molex Application Tooling Group

2200 Wellington Court

Lisle, IL 60532, USA

Tel: +1 (630) 969-4550
Fax:+1 (630) 505-0049

Visit our Web site at http://www.molex.com

«
1
2
3
4
5
...
»

Содержание FineAdjust APPLICATOR




















































Отзывы:

Нет отзывов

Похожие инструкции для FineAdjust APPLICATOR

Бренд: ParaBody Страницы: 5

Бренд: EuroLite Страницы: 28

Бренд: Maeda Страницы: 276

Бренд: OAKWORKS Страницы: 2

Бренд: Oakton Страницы: 2

Бренд: Oakton Страницы: 2

Бренд: O2matic Страницы: 4

Бренд: Fagor Страницы: 12

Бренд: Baltic Страницы: 68

Бренд: H&S Страницы: 76

Бренд: MAKSIWA Страницы: 155

univers N UC21LH1

Бренд: hager Страницы: 13

univers N UK31LH1FM

Бренд: hager Страницы: 2

univers N UK21LH1M

Бренд: hager Страницы: 3

Бренд: RAB Страницы: 4

Бренд: Lencarta Страницы: 6

Бренд: Delfield Страницы: 2

Vetter QuickStrut

Бренд: Idex Страницы: 14

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды