A–2
<Safety Precautions>
Please read the following before operating the tool.
4. Careful handling
Keep the items below to use the tool safely and properly.
* Please contact our application-tooling group if something’s wrong with the tool.
1) Tool
malfunctions
If you notice any unusual sound or movement in the tool, stop the operation
immediately and check the suspicious parts.
2) Foreign materials entering
If foreign materials such as water or metals accidentally get inside the tool, stop the
operation immediately and remove those materials.
5. Installation site
Be careful about the following items when you install the tool.
1) Temperature and humidity
Don’t operate the tool in extremely high/low temperature or extremely high humidity.
* Place it where the temperature is stable around 23 degrees centigrade and the air is
well ventilated.
2) Dust and corrosive gas
It will become the cause of failure if dust, corrosive gas, etc. are in the circumference of
this tool.
* Please don’t install this tool to such a place.
3) Unstable work table
When this tool is set up in an unbalance worktable, it not only becomes a dangerous
operation but also there is a case to cause the tool damage and it is dangerous.
* Please fix the tool on a stable table horizontally.
