A–1
<Safety Precautions>
Please read the following before operating the tool.
1. Introduction
Thank you for choosing our 1.0mm Pitch I/O Cable Wiring Tool.
This instruction manual is prepared so that the tool is properly used.
Please take the time to read this manual, making sure you understand the operating
procedures described herein before attempting to operate the tool.
2. To operation supervisors
1) Operators should fully understand the contents of this manual before operation.
2) If operators do not understand English, translate this manual into the proper language.
3) Keep this manual near the tool so that operators can refer to it anytime.
3. Dangerous operations
Observe the following precautions to prevent a life-threatening accident.
1) Don’t insert a part of your body or other foreign materials into the tool when you are using
the lever of a tool
2) Don’t place the tool on an unstable, off-balanced worktable from which the tool might fall
down.
3) If more than two operators are engaged in operation or checkup at the same time, even
slight miscommunication might lead to a serious accident.
Caution
1) Unauthorized reproduction of this document in part or in whole is prohibited.
2) The contents of this document are subject to change without notice.
3) Molex Japan Co., Ltd. assumes no responsibility for losses resulting from use or
misuse of this document.
