Page 11
5.3. Exchange Method of Wire Cut Blade and Wire Pusher
1) [Exchange of wire cut blade]
The “wire cut blade (4)” can be removed below by removing the “M6 screw (2)” at the
center of the “cut blade holder (1)” of the wire pushing unit” and loosening the “fixed
screw (3).”
2) [Exchange of wire pusher]
The “cut blade holder (1)”, “wire cut blade (4)”, and “wire pusher (5)” come off from the
tool when the “fixed screw (3)” is removed.
“Note”
Please note that the “internal compression spring” falls simultaneously with the wire
pusher when you exchange the pusher.
Cut blade holder (1)
M6 screw (2)
Fixed screw (3)
Wire pusher (5)
Wire cut blade (4)
