Molecular Devices SPECTRAmax 340PC, Руководство оператора

Страница: 48 / 69

Chapter 4
4-4 SPECTRAmax 340PC Microplate Spectrophotometer Operator’s Manual
General
Keep the drawer closed when the instrument is not in use. The drawer can be
opened by pressing the DRAWER button. Always close the drawer immediately
prior to switching the instrument off.
Cleaning
Wear gloves during any cleaning procedure that could
involve contact with either hazardous or biohazardous materials or flu-
ids.
Periodically, you should clean the outside surfaces of the SPECTRAmax 340PC
using a cloth or sponge that has been dampened with water. Do not use abrasive
cleaners. If required, clean the surfaces using a mild soap solution diluted with
water or a glass cleaner and then wipe with a damp cloth or sponge to remove any
residue. Do not spray cleaner onto the instrument.
If needed, clean the microplate drawer using a cloth or sponge that has been
dampened with water.
Should fluids spill in the drawer area (when the drawer is out), they will be
directed to a tray at the bottom of the instrument, from which they will exit to
the bench or counter beneath the instrument. Wipe up any spills immediately.
Clean only the exterior of the unit (and the microplate drawer if necessary).
Never clean the inside of the instrument. Do not allow excess water or other flu-
ids to drip inside the instrument.
Cleaning the
Fan Filter
The fan filter on the bottom of the instrument requires periodic cleaning. The
frequency of the cleaning depends on how dusty your particular lab is and could
range from once a month to once every six months.
1) Turn power to the instrument OFF and then remove the power cord and
cables from the back of the instrument.
2) Make sure no plate is in the instrument. Turn the instrument over so that it
rests flat on the bench.
3) Pop the black fan cover off the remove the filter.
4) Clean the filter by blowing clean, canned air through it or by rinsing it—first
with water and then with alcohol—and allowing it to dry completely.
5) Place the clean, dry filter over the fan and replace the black cover.
6) Turn the instrument back over. Reconnect the power cord and cables to the
instrument.
BIOHAZARD: