Mold-Masters TempMaster XL-2 Series, Руководство пользователя

Страница: 26 / 39

Customizing your controller XL-2 Manual
Page 26
Mold-Masters
®
Revision 1.1
“Adr” is only used for establishing serial communication with
Graphical Interface via RS485.
Item “dSP” can be set to alternate temperature reading between
two zones automatically in every 10seconds.
Viewing current parameters
To see Menu Item values:
1. From the Temperature Display Screen, press and hold
button for at least 2 seconds until you get into Function Menu.
2. Use to scroll to “Prog” then press button to enter
Program Menu.
3. Use or scroll the menu. Top display shows Menu Item
symbol, bottom shows value.
Changing menu item parameters
1. From the Temperature Display Screen, press and hold
button for at least 2 seconds until you get into Function Menu.
2. Use to scroll to “Prog” then press button to enter
Program Menu.
3. Use or scroll to your desire item. You will see the
bottom display flashing.
4. Press to get access to change parameter setting. The
bottom display should stay.
5. Use or change to your desire setting.
6. Press to save the change. The bottom display should be
blinking again. (To exit from Program Menu without changing
setting, press to return to Temperature Display Screen.)
7. You may repeat step 3-6 to change other parameter settings.
Restoring all Parameters to factory settings
In order to restore the parameters back to their original factory
setting:
1. From the Temperature Display Screen, press and hold both
and together for at least 2 seconds until “Std” is shown
on the top display.
2. Press to restore the factory settings; the display should go
back to Temperature Display Screen. Or press to escape
without loading settings.