Mold-Masters TempMaster XL-2 Series, Руководство пользователя

Страница: 10 / 39

Navigation XL-2 Manual
Page 10
Mold-Masters
®
Revision 1.1
Program Menu
Within this menu there are a number of controls that are provided
for you to customize your controller. You can select this menu
from the Function Menu only. Each zone has its own program
menu items to meet its own needs; however, there are some
items shared by two zones. Refer to “Customize your controller”
section for detailed explanation on each parameter in the menu.
•
In Function Menu, use to scroll to “Prog”, and then press
to enter into Program Menu.
•
Scroll through the menu by using or to. Top display
shows menu item, bottom shows setting. You cannot change
setting when bottom display is flashing.
•
Press to gain access for any changes by , bottom display
then stays.
•
Use or to change setting, press to save the change.
Bottom display starts flashing again. If bottom display stays,
pressing to escape from Program Menu without changing
setting.
•
After changes are made, press to return to Temperature
Display Screen.