2. Shut down the console.
On the Utils page, choose [
Exit
] to shut down the console computer.
3. Shut down the controller.
Use the main power switch to isolate all the power to the whole system.
On the M1-48 use the rotary isolator.
On the smaller M1-12 or
M1-24 controllers use the
breaker switch.
Switch Off (Shutdown) - continued
6.2 Control Modes for All Zones
WARNING
Choosing Stop mode does not remove voltage from the heaters.
Do not try
to change fuses or disconnect units while in this mod
e.
These modes can be accessed from the Main page.
6-2
M1 Plus Controller User Manual
OPERATION
© 2021 Mold-Masters (2007) Limited. All Rights Reserved.
