
Table 5-5 Utilities Parameters
Function
Description
Notes
Language
Sets the language used for the screen
text.
User can choose any language listed.
After choosing a different language,
the console will temporarily shut
down and restart in the new selected
language.
• If the system is in Run mode, then
the control cards will maintain the
working temperatures during this
brief changeover.
Limit Exceeded
[
Disabled
] – means that an attempt
to set the temperature above the limit
has not been effective and the set
temperature will stay the same.
[
Enabled
] – means that an attempt to
raise the set temperature above the
limit will increase the set temperature
to the limit.
N/Z Alarm
[
Disabled
] – leaves N/Z in its normal
condition which does not raise a
system alarm if it occurs.
[
Enabled
] – allows N/Z condition to
initiate a system alarm notification in
the lower status window.
• At the same time it energizes the
Alarm Relay for remote signaling.
Paper Size
Chooses A4 or letter sized printer
paper.
Password Timer
Sets the Password-Active timer.
Power Display
[Peak
] option shows the peak amps
delivered.
[
Derived
] modifies the peak power
by the percentage time for which it is
switched on.
• i
t will usually read less than [
Peak
]
Printer
Chooses a connected printer from a
stored list.
Printer Address
Chooses a local connected or network
connected printer.
Protocol Address
Enters an address for the console
when it needs to communicate via an
external protocol.
Protocol Installed
Shows the Protocol which is currently
installed and which will be used to
communicate with remote terminal.
Defaults to SPI and is not user-
configurable
• can be set to Kistler protocol if
requested when ordered.
Utilities Parameters - continued
5-18
M1 Plus Controller User Manual
SETUP
© 2021 Mold-Masters (2007) Limited. All Rights Reserved.