Moen SW8001A, Руководство по установке

Страница: 8 / 16

顺时针旋转
90°
锁紧。
Rotate 90° clockwise to lock.
将按压杆插入面板支架的导向孔，并对准水箱内部的
螺纹孔标记出多余部份后，用小刀切除多余部份。
Use a knife to cut the mounting box above the tile
surface, bend the excess part and discard it.
将正确尺寸的按压杆重新插入面板支架的导向孔，
对准水箱内部的螺纹孔顺时针旋转
90°
锁紧。
Reinsert the pressing rod of the correct size into the
guide hole of the panel bracket, and align it with the
threaded hole inside the water tank and turn it
clockwise by 90° to lock it.
将面板扣在面板支架上，并确认安装牢固。
Fasten the panel on the panel bracket and confirm
that it is firmly installed.
90°
90°
“
咔
”
墙面厚度
“Click”
“Click”
The drawing board is subject to the actual
product, the picture is for reference only
Wall thickness
20-60mm
0
90°
“
咔
”
面板以实物为准，图片仅供参考