Moen SW8001A, Руководство по установке

Страница: 3 / 16

安装说明
Installation Notes
如下图，确认陶瓷马桶的孔距
H
，选择管夹
安装方式，获取对应冲水孔与排污孔的孔距。
（出厂默认
135
孔距安装）
As shown in the figure below, confirm the hole
distance H of the ceramic toilet, select the pipe
clamp installation method, and obtain the hole
distance between the flush hole and the sewage
hole. (Factory default 135 hole pitch installation)
管夹上装时管中心距可调：
135/145/150 (
三个固定位
)
When the pipe clamp is installed, the pipe center
distance is adjustable: 135/145/150 (three fixed positions)
管夹下装时管中心距可调：
165/155/150 (
三个固定位
)
Adjustable tube center distance when the tube
clamp is installed: 165/155/150 (three fixed positions)
h=165
h=135
安装前注意事项
•
请确认包装内物品是否完整。如有缺失，请及时与
我们的客户中心取得联系。以上物品图片仅供参考，
以实物为准。
•
请仔细阅读以下说明。为避免伤害身体或损坏设备，
请按照说明一步一步安装设备。
•
根据最新的生产资料执行说明书。 我们保留更改规格、
包装权利，恕不另行通知。
•
因使用其他公司的任何零件而导致的任何故障，
我们概不负责。
•
使用环境温度：5℃-45℃。
•
进水水压范围：0.10MPa-0.75MPa。
•
进水口规格：G1/2"外牙。
• Please comfirm whether the contents of the
package are complete.If there is any missing,
please contact our customer center in time
。
Image is for reference only, style varies by model.
• Please read carefully the following instruction.
In order to avoid injuring body or damaging
equipment, please install the equipment following
the instruction step by step.
• The instructions are complied according to the
up-to-date production information. We reserve the
rights to make the changes about specifications,
packaging without prior notice.
• We shall not be responsible for any failure of
using any parts from other companies.
• Ambient temperature: 5
℃
-45
℃
.
• Inlet water pressure range: 0.14MPa-0.75MPa.
• Water supply method: Ball valve G1/2.
Precautions before Installation