Instruction notice (EN)
3
NOT-PY68-EN-2020-v01
Introduction
This instruction manual must always be available and kept close to where the actuator will be used.
This document is unique and is owned by the company
modec
. It cannot be corrected, modified or duplicated without prior
written agreement. This document should not be considered a replacement for safety rules set out in the Work Code or in
any other legislation that applies to the site where the actuator is used.
It belongs to the operators to make sure that all security regulations applicable to both the work site and the Portable Valve
Actuator conditions of use are respected.
modec
products are conceived and fabricated with the utmost care and attention for the safety of both the operator and the
equipment. This is certified by the declaration of conformity with the relevant clauses in the European directive 2006/42/CE.
The actuators described in this document may evolve. We reserve the right to modify their specifications, without prior notice.
Updates will be available on our website
. It is important to refer to the website before setting up or using the
actuator, and before carrying out maintenance. Any modifications made to the actuators or their accessories must be
approved in writing by
modec
.
Operators in charge of setting up, using or servicing
modec
actuators must have a reasonable knowledge of the equipment.
As well as carefully reading this instruction manual, they must be competent in the valve sector and the particularities related
to their work environment.
KEEP THESE INSTRUCTIONS
This manual contains important information and user instructions for the following tools:
Petrol Gas Portable Valve Actuator PY68x-xxx-xx.
It is IMPERATIVE that you read the whole of this user guide before using the tool or carrying out any maintenance
operations. Make sure you follow to the letter the instructions and diagrams found in this document. Failure to adhere
to the instructions contained in this manual, and any modifications, omissions or the use of replacement parts that do
not adhere to the specifications set out in this manual, clears the manufacturer of all responsibility related to the
protection of people and equipment.
