Instruction notice (EN)
16
NOT-PY68-EN-2020-v01
8. Options
a.
Digital Revolution counter
PRESENTATION
The digital Revolution counter adds up the
revolutions in one direction and subtracts
them in the other direction in such a way that
the operator always knows where he is in
relation to the initial set-up. The tool also
measures and shows the rotational speed.
Nota 1 : The instant speed indicator needs several revolutions before it can give a stable and regular speed. In light of this,
you have to wait several seconds to get a reliable reading.
Nota 2 : The screen turns itself off after 5 minutes.
HOW IT WORKS
«
Revolution count mode ‘’t’’ »
«
Speed mode ‘’s’’ »
3 s
« Reset to zero »
REVOLUTION COUNTER PARAMETERS
The revolution counter is set by default for a straight or right angle head standard output shaft (STD), without Banjo head.
When used with a BJH banjo head (see chapter 8), the number of turns and the output speed of the actuator will be
different, so you need to select “BJH01” for a standard duty Banjo head (speed is divided by 4) or “BJH02” for a heavy
duty Banjo head (speed is divided by 3).
If you want to set a specific ratio for speed and count,
select “SP”, then indicate of you want to multiply (“M”)
or divide (“d”) the speed and number of turn,
and set the ratio “I=” from 1.0 to 20.0.
« ON »
Screen
« SET »
« MODE »
