manualshive.com logo in svg

Mode Lighting SceneStyLED4, Руководство пользователя

Поделиться
Скачать
Mode Lighting SceneStyLED4 Скачать руководство пользователя страница 15

Advanced Circuit Configuration

14

ADVANCED CIRCUIT CONFIGURATION

Briefly pressing the advanced button displays the second page of the circuit configuration 
menu, which gives further circuit options.

Boost

Some light fittings might not turn on to a low light level, despite being able to operate at that 
light level during normal operation. One of two levels of boost can be chosen to ensure light 
fittings always turn on by pressing the boost button. 

Dim Mode

Changing the dim mode can improve the dimming of some types of light fittings. This setting 
should only be changed if issues are being experienced.

Shutdown Enable / Disable

The shutdown button can be used to disable SceneStyle’s protection circuitry, although this is not 
recommended unless the protection circuitry is causing an issue. When the shutdown enable 
button is lit green, the shutdown circuitry is active and SceneStyle is protected from circuit faults.

REMOTE SWITCH CONFIGURATION MENU

The remote switch configuration menu is used to set up SceneStyle’s four remote switch inputs. To 
enter the remote switch config menu, press the remote switches button on the main config menu. 
To return to the previous screen at any point, press the return button.

Remote Switch Configuration Menu

Содержание SceneStyLED4

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды