Mobotix T24S, Руководство по эксплуатации и установке

Страница: 59 / 100

59
/98
One T24S In A Separate Network
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Table Notes
In the columns "Grandstream IP telephone" and "PC with MxEasy", the program displays
the events/modules for which either a call is triggered (VoIP to telephone, TCP to PC) or
for which a change in the status is triggered (a T24S connected external light is on/off ,
a T24S connected door is open/closed locked). The SIP quick-dial number of the con-
cerned Grandstream telephone is also shown in the table. *1XX stands for all connected
Grandstream telephones.
The designations "Button Right", "Button Left", "Signal Input 1 (7.1)" etc. in the column to
the left stand for the input signals that can be activated or reprogrammed using the web
browser in the camera software (Signal Input 1-8).
Confi guration Using A Web Browser
Like every MOBOTIX camera, the T24S Door Camera can also be
reached directly by entering the camera's IP address in the address
bar of a standard web browser (e.g. Internet Explorer). This allows
you to make changes to the camera confi guration.
For details, see the
MOBOTIX Camera Software Manual
, which
can be downloaded free of charge from the MOBOTIX website
under the Support > Manuals.
Notes
The
signal inputs (Signal Input 1–8)
may be modifi ed under the
Setup > Event
Settings
menu.
The confi gurable
signal outputs (Signal Output 1/2)
can be set up using the menu
Setup > Enhanced Signal Out Options .
However, fi rst, the related
Action Profi les
for Phone Call, Short Message, FTP, E-Mail,
IP Notify, Sound or Signal Out events must be confi gured.
The actions are then linked
with these profi les: Setup > Action Groups
.
Download the Software
Camera Manual that is in the
same sub-net as the T24S
at www.mobotix.com
Support > Manuals
See the table "Circuit
Assignment" in
Section 2.4.2