Mobotix T24S, Руководство по эксплуатации и установке

Страница: 54 / 100

54
/98
T24S System Manual: Operating The Door Station
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Door Bell Setup
In addition to the optional bell button on the camera module itself, the system supports
up to four Siedle doorbell buttons, which can be configured to trigger a VoIP call to an IP
videophone and a MxEasy message to a PC as an action when pressed. If multiple actions
are desired when the door station bell button is pressed, these can be configured to be
carried out simultaneously, sequentially or even with a delay. Simply click through the
individual dialogs to configure behavior.
For each bell (camera doorbell, Siedle doorbells), multiple actions (message MxEasy or Voice
Over IP call) and the remote party associated with the action, i.e. a PC or IP videophone,
may be selected in the dialog. Actions can be added and removed by selecting "+" or "-".
Voice Over IP call:
A connection to an IP videophone on the network is automatically
established when the bell button is pressed. The telephone can be selected using its IP
address or, even more easily, using its SIP quick-dial number (e.g. *101, shown on the
telephone's display). The current IP address and quick-dial number are assigned to each
telephone during automatic initial configuration.
Message MxEasy:
A connection to a PC on the network with MxEasy installed and run-
ning is automatically established when the bell button is pressed. The PC to be messaged
is selected by its IP address. The selection dialog displays all IP addresses found on the
network by MxEasy. If in doubt, you can find the IP address of a PC in its system network
configuration.
Note
By selecting
"Edit remote station"
you can enter a new name to replace the IP
number (e.g. Office PC).