Mobotix T24S, Руководство по эксплуатации и установке

Страница: 40 / 100

40
/98
T24S System Manual: Connecting The Door Station And Modules
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
2.7 Network And Power Connection For The Camera Module
2.7.1 Notes On Cable Lengths And Power Supply
The T24 camera module can only be powered using the Ethernet connector of the camera.
We recommend using a MOBOTIX PoE adapter, or another similar high-quality PoE product
to loop-in the power supply:
•
a camera/door station:
with the PoE adapter (MX-NPA-PoE)
•
multiple cameras/door stations:
with PoE products conforming to IEEE 802.3af (PoE
switch)
The
maximum length
of the network cable for power supply over an Ethernet cable is
100 m
.
Make sure that you only use switches or routers that support the
10/100 Mbps Ethernet
interface of the camera. Check the LED activity of the corresponding port at the switch
or router.
It is highly recommended to use uninterruptible power supplies (UPS) to provide backup power.
If you are using IEEE 802.3af Power over Ethernet network components to supply power to
MOBOTIX cameras, make sure, if possible, that these components do not have a fan. Since
the power consumption of MOBOTIX cameras is very low compared to other products, the
reliability of the entire system is increased, thus extending the life of these components.
Note
Connect the Siedle modules according to the circuit diagram using Siedle power
supplies in the electrical cabinet.
Caution
This chapter offers you a overview of the different options. Make sure to familiarize
yourself with chapter 3 before connecting the T24S.