Mobotix T24S, Руководство по эксплуатации и установке

Страница: 49 / 100

49
/98
One T24S In A Separate Network
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Integrating Cameras With The Status "Accessible"
Once have you selected the desired cameras,
click on
Continue,
and confi rm the security
prompt by clicking on
OK
.
If some of the selected cameras are password-
protected (
status: Authentication required
), MxEasy
will prompt you to enter the corresponding user
name and password.
In this step, the MxEasy Assistant also saves the
entire confi guration for all selected cameras. As
a result, this confi guration can be easily restored
at a later time.
Integrating Cameras With The Status “Invalid Network”
Network confi guration for MxEasy Assistant will only be carried out if one of the selected
cameras displays the status "Invalid network". This status always occurs if more than one
T24S must be integrated in a network without a DHCP server, for example.
If the control PC obtains its
IP address automati-
cally from a DHCP server (e.g. a DSL router), the
Get IP address automatically
option should be
selected for this camera and all other disco-
vered cameras.
If no DHCP server is available on the network
and you have previously assigned a
static IP
address
to the control PC (10.0.0.20), you must
now also assign a static IP address to each camera using the 10.x.x.x notation. Select the
Use this IP address
option and enter an IP address of your choice. We recommend, for
example, the addresses in the range from 10.0.0.1 to 10.0.0.254; the subnet mask must
be confi gured as on the PC and Grandstream telephone to 255.0.0.0. Ensure that the
selected address is not already in use by another device on the network.
Once you click on OK, the selected cameras will be reconfi gured automatically. The cameras
are now in the same subnet as your computer. These cameras will now be displayed as
"Accessible" in the camera list.
This dialog will NOT
appear after automatic
initial confi guration
This dialog will NOT
appear after automatic
initial confi guration