Mobotix T24S, Руководство по эксплуатации и установке

Страница: 39 / 100

39
/98
Replacing The MicroSD Card
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
4.
Remove the back of the camera and take
out the MicroSD card:
Remove the four screws
and carefully lift the back plate from the housing.
5.
Remove the MicroSD card:
Gently push on
the MicroSD card in the card slot of the cam-
era. The card will be released from the slot
and can then be removed from the camera.
2.6.2 Inserting The MicroSD Card
1. The MicroSD card must slide into place with an audible and perceptible click. Then,
screw the back plate of the camera back into place, connect the MxBus and patch
cable connectors, and snap the camera module back into place in the Vario frame.
2. Activate recording: If you have inserted a MicroSD card that has already been
MxFFS formatted, you can activate recording under Admin Menu > Storage on
External File Server / Flash Device. Once the camera has been rebooted, it auto-
matically activates recording.
3. If a new MicroSD card is used , it must be formatted before use (for instructions,
see chapter 4).
Note
When inserting the card, ensure that no small cables are jammed and that the back
plate is replaced in the correct position (MxBus connector at the top).
Push-push function:
The MicroSD card can
only be removed after
pushing it in gently