25
/98
Preparing Network And Power Connections
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
2.2 Preparing Network And Power Connections
The door station requires the following cabling:
•
(A)
Ethernet cable from the PoE switch (or from a router with additional PoE power supply)
•
(B)
Two wires for the the power supply to the Siedle modules from the transformer
in the electrical cabinet
•
(C)
Two wires for the anti-theft protection controller in the electrical cabinet (optional)
•
(D)
Two wires for the 230 V light relay
•
(E)
Cables to the external door opener, door switch and door lock switch
Recommendation For Cabling
For cable line A (network), MOBOTIX recommends using a category 5 (CAT5) Ethernet
installation cable or higher. For
cable lines B, C and D
, we recommend laying an
8- or
10-wire ySTy (telephone) cable with 0.8 mm (0.26 in) core diameter
, even for smaller
installations, to make future expansion more convenient. As a rule, however – when
maximum cable lengths are kept low – YSTY (telephone) cable with only 0.6 mm (0.02 in)
core diameter may also be used.
When laying the cable, ensure that suffi cient length remains in reserve on the door station
end for later extensions or for swapping modules
(lay a cable loop). All two-wire lines
should be fed in through a fl ush-mounted socket on the inside of the door with suf-
fi cient space for cable reserves.
Both the Ethernet cable and other cables must be stripped at the ends.
CAT 7 cable is designed
for 10 Gbit Ethernet
1.6 m/ 63 in
Содержание T24S
Страница 17: ...17 98 T24 Camera Module MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com...
Страница 23: ...23 98 MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com...
Страница 97: ...97 98 MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com...
