Mobotix AllroundDual M16B, Руководство пользователя

Страница: 97 / 124

97
Virtual PTZ and Full Image Recording
3.4.3 Special M16 Configuration in the Browser
M16 and Different Sensor Modules
A range of combination options are provided that change
the available display modes and configuration possibilities
by using the MOBOTIX M16 with different sensor modules.
Because of this, a M16 automatically detects which sensor
modules are installed and proceeds as follows:
• When the camera is started for the first time, it detects
the connected sensor modules and captures their data
(focal length, day or night version).
• If only one sensor module is connected, the camera acts
as a mono camera (meaning that there is no automatic
day/night switching, etc.).
• If there is no change within the first 12 hours of opera-
tion, the camera writes the details of these sensor mod-
ules to the camera configuration.
• With every restart, the camera checks if the stored sen-
sor modules are present. If the sensor configuration
has changed in the meantime (e.g., because a sensor module has been exchanged),
the camera shows a corresponding message in the live image. To store the changed
sensor configuration in the camera, proceed as described at the end of Section 3.4.3,
«Special M16 Configuration in the Browser».
Configuration of the M16 Basic Parameters for Hemispheric Sensor Modules
Thanks to its hemispherical lens, the MOBOTIX M16 provides certain spe-
cial configuration options for the image settings. Depending on where
the camera is installed (ceiling, wall or floor) and
on the live image display preferred by the user,
certain important basic settings and, if necessary,
their adjustment must be configured when a M16
is first installed.
Sensor module B016* Sensor modules B036*, B041*,
B061*, B079*, B119*, B237*
Sensor module B500*