Mobotix AllroundDual M16B, Руководство пользователя

Страница: 62 / 124

62
M16 Camera Manual: Installation
Procedure
1. Convert to a ceiling mount: Simply remove the lock screw on the central joint and
exchange the wall mount for the supplied ceiling mount. Before fastening the ceiling
mount to the central joint (using the screw of the wall mount), the patch cable is guided
through one of the four openings.
2. Install and prepare the network connection: Guide
the pre-installed camera patch cable through one of
the four openings in the ceiling mount (this will be
connected later with the network cable using a suit-
able adapter, for example, in an existing cavity socket).
3. Drill the holes: Use the drilling template for the cam-
era (available on
www.mobotix.com
> Download
Center > Documentation > Manuals ). Drill the holes
for the supplied screw anchors. Screw anchors do not
have to be fitted if the surface is made of wood. To
secure the mount, the supplied stainless steel hex
head screws will be screwed directly into the surface
later on. You should start with a 2-mm drill bit, for
example (drilling depth just slightly less than screw
length), in order to facilitate screwing in wood.
4.
Attach ceiling seal:
Place the white rubber seal
with the groove on the edge of the ceiling mount.
5. Connect the cable: Connect camera patch cable
via connector. Make sure that the cable is not bent
or squashed.
No screw anchors
are required for
wooden surfaces
Additional sealing pos-
sible, for example,
with shrink tubing