Mobotix AllroundDual M16B, Руководство пользователя

Страница: 59 / 124

59
Mounting the Camera with Wall Mount
5. Mount the camera: Place the wall mount over the
drill holes and hold it against the wall. Then use the
four screws each with a washer and tighten them
using the appropriate wrench. Do not overtighten
the screws as this may damage the plastic mount.
Check that the screws are securely in place and
place the white caps on the screw heads. Then aim
the camera as described in Section 3.3.
6. Clean sensor modules: Clean the protective glass
and the dome of the sensor modules with a clean
soft cotton cloth for optimal image results.
7.
Establish a connection to the camera, check the image:
Establish a connection to the
camera as described in Section 3.1, «Manual and Automatic Operation – Overview»
and the following sections. The live image from the camera should be visible on the
computer monitor. Check image sections on the computer monitor.
Note
The
VarioFlex mount and ceiling mount must always be used for ceiling installation
(see Section «Ceiling Installation»).
Screw caps for lock screws