Mobotix AllroundDual M16B, Руководство пользователя

Страница: 86 / 124

86
M16 Camera Manual: Operating The Camera
3.2.4 Start Options of the Camera
By default, the camera starts as DHCP client and automatically tries to get an IP address
from a DHCP server. To start the camera in a mode different from the default mode, you can
activate the boot menu of the camera.
Preparing the Camera
• Disconnect the camera’s power supply.
• Make sure that you have suitable item such as a paper clip at hand,
but never use
sharp or pointed objects!
• Reconnect the power supply of the camera.
Activating the Boot Menu
The red LED lights up 5 to 10 seconds after establishing the power supply and will stay on
for 10 seconds. Briefly press the key by inserting the paper clip into the hole indicated by
the red circle in the figure. The camera enters the boot menu, ready for selecting one of
the start options.
The LED now flashes once and repeats the flash signal after pausing for one second (the
number of flashes indicates the current start option). To go to the next start option, briefly
press the key again (< 1 sec). After the last start option, the camera returns to the first option
(LED flashes once).
Selecting a Start option
Press the key longer (> 2 sec). The camera confirms the selection by flashing rapidly three
times. You can now remove the paper clip. After 20 sec, the camera will confirm the selection
by playing a sound according to the table above.
If nothing is selected, the camera will resume its normal boot process after a certain time.
1 2
L
LED default settings:
1 Power (on),
Error (flashes)
2 Recording (flashes)
LED
flashes
Start
Option
Meaning Audio
Confirmation*
1 x — This option is not used on this camera model. —
2 x
Factory
Defaults Starts the camera with factory defaults (factory default IP
address, users and passwords will not be reset).
Boing
3 x
Automatic
IP Address
Starts the camera as DHCP client and tries to obtain an IP
address from a DHCP server. If a DHCP server cannot be found
or no IP address can be obtained, the camera starts with its
factory default address.
Boing Boing
4 x
Recovery
System Starts the camera with the recovery system, e.g., in order to
recover from a failed update of the camera software.
Alarm Sound
*Only on cameras with audio option and installed speaker.