Mobotix AllroundDual M16B, Руководство пользователя

Страница: 55 / 124

55
First Installation Steps
2. Place the camera on its right side (as seen by the
camera) as shown. Push the cable of the left sensor
module under the retaining lug at the screw bore
(red circle in detail figure)
3. Push the front element into the housing and make
sure that the sensor module cable remains under the
retaining lug (red circle in detail image).
4. Continue to push the front element into the housing,
then evenly press the front element into the housing
at the spots indicated by the red arrows.
5. Using the supplied 5 mm Allen wrench, tighten the
two bolts at the back of the camera housing. Push
the two rubber plugs back into the opening of the
screws to prevent humidity and dirt from entering
the camera.
Do not forget to apply
rubber plugs at the
back of the housing!