MobileView 7000 Series, Руководство пользователя

Страница: 54 / 67

MobileView 7000 Series User Manual
46

IPC-RCV : This is a list of IP and Analog camera channels where the device is receiving
data. This matches the online column from the device access list shown on the Cameras
section of the Manage IP Devices web configuration page.

A or I : The upper case "A" or "I" indicates the video channel is Analog or IP and is active or
received.

x : The lower case “x” indicates the IP channel is not active or not receiving.
Opening the Video Status Menu
1. After opening the Status menu, select Video to open video status.
2. The video status displays and cannot be changed.
Video Status Menu
Note : The example provides the following status information.
Analog Channels: 1,2,5,8
IP Channels: 3,4,6,7
Not Enabled Channels: 9-16
Video Loss Channels: 4, 8
Wireless Menu
The wireless status menu displays information related to wireless devices and functions of the device.

GPS : Provides current state of GPS signal.
o
No Module : GPS module not detected (failure condition)
o
Sat Lock : Positional information being received
o
No Service : Positional information not being received

WIFI : Provides current state of Wi-Fi signal.
o
No Module : Wireless module not detected
o
Not Enable : Wireless module not enabled
o
Failed : Wireless module not working properly
o
Scanning : Wireless client scanning for access point
o
Connected : Wireless client connected to access point

Mode : Provides current operational mode of Wi-Fi module.
o
Not Enable : Wireless module not enabled
o
Client Mode : Wireless module in client mode
Opening the Wireless Menu
1. After opening the Status menu, select Wireless to view the wireless status.
2. The status displays, automatically updates and cannot be changed.