MobileView 7000 Series, Руководство пользователя

Страница: 43 / 67

MobileView 7000 Series User Manual
35
To set recorder time, click the Set Time button under the Time Settings. This will open a dialog box
to set the time on the recorder. Time is only updated using this dialog; time is not updated when the
apply button is pressed on the main Date and Time page.
Set Time
Media Setup
Media Setup is used to configure and manage the media used on the recorder. This includes media
inside the media caddy, SD media, and currently attached USB media.
NOTE: Media can only be mounted after the caddy key is in the lock position.

Media Caddy Format : Media format function initializes and prepares media for use in the
recorder. The format operation erases all data on the disk.

Mirror Mode : Mirror mode configures duplicate recordings to both disks in the media caddy.
This results in half the recording storage space but provides redundancy if a drive inside the
media pack fails. If a single drive failure occurs, data remains available on the working drive.
Once important data has been collected, the media caddy should be replaced.

SSD Mode : Solid state drives (SSD) have higher operating temperatures than hard disk drives
(HDD). Select the check box to use the SSD temperature profile instead of HDD temperature
profile.
o
SSD Temperature Profile : 0°C to 55°C External Ambient
o
HDD Temperature Profile : 0°C to 40°C External Ambient

SD Missing as Storage Error : The SD card is normally installed and contains the recorder
log file. Check the box to trigger a storage error when the card is missing.