MobileView 7000 Series, Руководство пользователя

Страница: 28 / 67

MobileView 7000 Series User Manual
20
Opening a browser connection
Once the network connection has been established, use the following steps to open the web server
built into the recorder.
1. On the service laptop, open a browser. Use Internet Explorer 11.
Note: Compatible browsers require installation of extensions to support specific functions such as
video display. If extensions are not loaded, graphics may not display correctly.
2. Type the IP address in the browser address bar of the recorder and press Enter .
192.168.0.100
The browser displays a logon page and proceeds to a warning page.
3. Follow the instructions to proceed.
The logon page displays again.
Recorder Browser login page
CAUTION : The recorder uses secure communications over port 443. It also uses a self-signed
certificate residing on the device. By default, browsers consider self-signed certificates untrusted and
a warning is displayed. A third-party signed certificate is also considered untrusted if connection to
the trust agency is unavailable. Since the recorder is normally deployed on a private network, the trust
agency is unavailable and the warning message still displays. For these reasons, the warning message
is an accepted limitation of implementing secure browser communications.
General browser pages
Once the recorder has been installed, configure using a connected service laptop.
Login
Once connected to the recorder, a browser logon page displays. Enter the correct username and
password and click Log in to enter the configuration pages.