MobileView 7000 Series страница 18 Скачать руководство пользователя

Страница: 18 / 67

Attaching Recorder Hardware

Use the following information to attach field wires directly to connectors. Harnesses provide an easy

way to connect and disconnect the recorder from the vehicle for service, maintenance, or repair.

Connectors must be fully seated and each screw down tightly to ensure the connector remains in place

during normal operation.

WARNING

The installer is responsible to power off the recorder before connections are made.

Check all power connections for shorts and grounds before applying power. Failure to follow this

recommendation may result in damage to the vehicle or the recorder, including injury to the

installation personnel.

Harness connections

Harness connections to the recorder are made on the rear panel.

NVR Harness Connections

Harness connections

Power input connector

P1A

7001H Power input connector (12A input)

External devices connector

P2A

7001H RS485 connector

Serial interface connector

MUX AV output connector

Multi-IO connector part 2

Multi-IO connector part 1

Connector Removal

The recorders P6 and P connections employ a locking mechanism to ensure connection to the recorder

during operation. Connectors are logistically difficult to remove. To remove a connector, fully

disengage the locking mechanism and gently rock the connector side to side while pulling the

connector away from the recorder chassis. The connector eventually pulls free.

Содержание 7000 Series




































































Результаты поиска

Содержание 7000 Series

Отзывы:

Похожие инструкции для 7000 Series

Бренды по названию

Популярные бренды

MobileView 7000 Series, Руководство пользователя

Результаты поиска

Содержание 7000 Series

Отзывы:

Похожие инструкции для 7000 Series

Бренды по названию

Популярные бренды