MobileView 7000 Series, Руководство пользователя

Страница: 37 / 67

MobileView 7000 Series User Manual
29
Setting up G Sensor Alarm
To configure how the system will react when the G sensor parameters are exceeded, perform the
following.
1.
Click Notifications .
2.
Click G Sensor .
3.
Click Enable .
4.
Identify alarm output.
5.
Click Apply .
Setting up Install Orientation
To define how the recorder is installed on the vehicle, perform the following:
1.
Click Notifications .
2.
Click G Sensor .
3.
Click Side or Front . Choose the option that best describes the orientation of the recorder. The
arrows point towards the front of the vehicle
4.
Click Apply .
Alarm Settings
The Alarms option includes configuration settings related to inputs and outputs monitored by the
device. These include digital inputs (alarm inputs), relay outputs (alarm outputs), acceleration alarms,
and J1939 message alarms.
Alarm Inputs
Use the Alarm Inputs option to configure when digital (discrete) and analog (variable) inputs are
considered active. The active state of an input is used to trigger events. The page also automatically
updates the current activation state of each input according to the configuration setting.

Digital Inputs: Digital inputs are relays or switches having a defined normal state of open
(OFF) or closed (ON). Digital inputs monitor for the presence (closed) or absence (open) of a
voltage. Voltage range and values are shown below.
o
0VDC – 5V = Open (Off)
o
5VDC – 6V = No state guarantee
o
6VDC – 36V = Closed (ON)
o
40V = Max voltage before damage

Analog Inputs: Analog inputs are sensors without a single defined ON or OFF state such as
pressure, lever position, and fuel level sensors. These devices have a set value triggering an
action. Analog inputs activate when the current value is higher or lower than the set value.