Remote - Web Browser Session
MA 850 Installation and Configuration Guide
31
•
Hardware Address
– MAC address
•
Additional identification parameters that may be available
3.
For networks with DHCP:
•
The dynamically assigned IP Address will also be listed in the
IP Address
column.
4.
For networks without DHCP:
•
Disregard the data displayed in the
IP Address
column and assign a Static IP address
according to Assigning a Static IP Address, page 31.
What next ?
Define the SNMP parameters according to Configuring the SNMP Parameters, page 34.
4.2.1.3
Assigning a Static IP Address
NOTE:
This procedure requires the MAC address of the MA 850, which is found on the label
located at the rear of the unit.
Perform the following procedure for each of the MA 850 units listed in the Lantronix
DeviceInstaller main window which are to be manually assigned IP Addresses.
1.
Select the MA 850 unit and click the icon
Assign IP
in the toolbar.
Figure
4-5. Assigning Static IP Address
The Device Identification window appears, showing the MAC address of the selected MA 850
unit.