
Add-on to an MA 1000 with MA 1200
MA 850 Installation and Configuration Guide
19
3.5
Add-on to an MA 1000 with MA 1200
In this type of installation, the MA 850 and MA 1000/1200 assembly are separated by a bracket.
NOTE:
It is recommended to mount the MA 850 to the wall, and the MA 10001200 assembly on
top of the MA 850 (with a bracket between them). However, if a previous MA 1000/1200
assembly exists, you may install the MA850 on top of the existing assembly, (with a bracket
between them.)
To assemble an RHU 1000 onto an MA 850
1. Assemble the supplied bracket to the top of the MA 850, where the notched side of the
bracket is towards the rear of the unit. Secure the bracket to the MA 850 unit using the four
supplied screws.
Figure
3-2. MA 850 and Bracket Assembly
Two screws
Two screws