Mobatime EuroTime Center ETC 12, Инструкция по эксплуатации

Страница: 24 / 96

© MOBATIME 24 / 96 800337.22
10.3 Baudrate Mode (only with CAS synchronisation)
Choice of baudrate determination in case of synchronisation through CAS protocol.
MENU
Synchronisation
Configuration
Baudrate Mode:
Selection from:
Auto, Manual
In
Auto
mode the ETC tries to determine the baudrate of the CAS master automatically.
This process can last for some minutes.
10.4 Baudrate (only with CAS synchronisation)
Selection of the baudrate in case of synchronisation through CAS protocol.
MENU
Synchronisation
Configuration
Baudrate:
Possible Selection:
1200, 2400, 4800, 9600, 19200 Bit/s
10.5 Time Zone
Specify the time zone of the time source.
MENU
Synchronisation
Configuration
Time Zone:
A time zone is suggested in line with the selected time source. E.g. when selecting
DCF
as time source the time zone 02 for Central European Time will be suggested.
The cursor keys / are used for selection from the 100 possible entries, or the
time zone can be selected by means of a numerical input.
10.6 Synchronisation Only
When this setting is activated, the external time source can only set the internal master
clock time, where the difference between the time source and the internal master clock
is b/- 1 second and +/- 30 seconds. If the difference is between 0 and 1 second,
the internal master clock will be adjusted to the time source in steps of +/- 10 ms per
received time telegram. Automatic daylight saving time changeovers are not affected by
this setting.
Notice:
After first synchronization of the ETC, it is recommended to activate the function
'Synchronization only' to avoid time jumps.
MENU
Synchronization
Configuration
Synchro. only:
Selection from:
Yes
or
No