Mobatime DT.100.1C.1T, Инструкция по эксплуатации, Страница: 7 / 40

© MOBATIME 7 / 40 800845.01

fix the cables with the holder in correct positions in order to maintain regular
spacing between the cables in the area of passing through sealing; use
apropriate force to not to damage the cables insulation;

configure the Line type jumper according to used synchronization signal
(applies only for DCF, MOBALine, Serial MOBATIME code, polarized
impulse line or IRIG-B);

mount back the connector cover;

close the front window and mount back the hexagonal screws into both
bottom corners – use the adequate force for fastening the screws.

click-on delivered corner covers, they can be dismounted using narrow
screwdriver.
2.3 Double-sided display

the double-side display consists of the displaying and the control part, and
the central mounting console;

assemble the mounting console if delivered disassembled;

drill appropriate number of anchoring holes in the wall for 10 mm dia wood
screws, use the mounting console as a template;

mount the console on the wall;

hang the displaying part on one side of the console, this display part does
not incorporate a cover of connectors, and is linked with the control part via
cable;

the remaining installation steps are the same as with the single-sided
display, additionally it is necessary to connect the linking cable from the
displaying part to mating connector in the control part