Mobatime DT.100.1C.1T, Инструкция по эксплуатации, Страница: 20 / 40

© MOBATIME 20 / 40 800845.01
6 Control of the display using IR remote control
A 2-digit address is assigned to the clock. With the IR remote control the clock can be locked.
The setting of time, date and the clock parameters can only take place at clocks in an
unlocked state.
Function of the controller buttons in normal display mode
pushing F1 + entry of 2-digit address, unlock the clock with the
using numerical pushbuttons corresponding address
holding down F1 button unlock all clocks within the reach of the IR
beam of the remote control unit
holding down F2 button lock all clocks within the reach of the IR
beam of the remote control unit
holding down F3 button display the address of all locked clocks within
the reach of the IR beam of the remote control
CLOCK display of time on the first line (model with clock)
DATE display of date on the first line (model with clock)
MENU entry into the display configuration menu
SET entry into the time setting (model with clock)
Function of the buttons in the time setting and menu operation mode
>> move to next parameter
<< move to previous parameter
the + pushbutton increase of the value adjusted, in steps of 1
the - pushbutton decrease of the value adjusted, in steps of 1
holding the + pushbutton continuous increase of the value set up
holding the – pushbutton continuous decrease of the value set up
ESC return into normal display mode, without storage of the data
OK storage of values set up and return into normal working mode
SET entry into a submenu (where possible)
pushbuttons 0–9 entry of the corresponding numerical value
6.1 Setting of time and date
Press the SET button on the IR remote controller.
Enter the data in following order: year - day - month - hour - minutes
The display shows the year:
The actual parameter blinks, to change its value use the + , - or 0 to 9 buttons, to
move to another parameter use the << or >> buttons. To set the time press the
OK button. To exit the time setting without applying the changes press the ESC
button.