Mobatime DSC. 250.4, Инструкция по эксплуатации

Страница: 105 / 144

ECO‑M‑DK series
105
BE-801372.01-Digital_clocks_manual-221114
©MOBATIME
42
80
60
100
Ø5,2
34
0
340
250
44
42 8
34
0
340 115
7.7.4 Mounting
7.7.4.1 Single sided
• Prepare two holes in the wall by hinges pitch on the backside of the clock.
•
Insert the dowels to the prepared holes and screw the appropriate screws into them.
• Remove the screws on the bottom of the clock. Remove the bottom cover and plexiglass.
• Thread the cable(s) through the grommet and hang the clock on the prepared screws
in the wall.
• Cut the cable(s) to the appropriate length and connect the wires to corresponding terminals
or crimp the RJ45 jack to the Ethernet cable respectively.
• Mount the plexiglass and bottom cover.
7.7.4.2 Double sided
• Prepare four holes in the ceiling (or the wall) by bracket flange pinch).
• Insert the dowels to the prepared holes and fix into them the ceiling suspension (or the wall bracket)
using appropriate screws.
• Remove the screws on the bottom of the Master clock. Remove the bottom cover
and plexiglass.
• Cut the cable(s) to the appropriate length and connect the wires to corresponding terminals
or crimp the RJ45 jack to the Ethernet cable respectively.
• Connect the cable from Slave clock to the Master clock.
• Mount the plexiglass and bottom cover.