Operation & Maintenance, Page
17
of
23
Section
3
– Revision 2.3
coupling housing. The motor can now be safely lifted out of position.
Gearbox Replacement
Removal:
m
Remove the motor (See Heading ‘Motor Removal’)
m
Remove the fluid coupling. (See Heading ‘Fluid Coupling Replacement’).
m
Note, that if fitted Oil cooler modules must have their pipes disconnected.
m
Note, that when fitted the Gearbox Temperature Monitoring System must be removed from the gearbox
m
Remove the motor mounting bracket or coupling housing from the gearbox.
m
Remove the top cover plate to expose the gear coupling.
m
Split the two clamping rings from the gear coupling, taking care not to damage the ‘O’ ring.
m
Slide the coupling sleeve towards the gearbox.
m
Attach lifting equipment to the gearbox lifting eyes.
m
Remove the studs/bolts connecting the gearbox to the gearbox mounting plate.
m
Slide the gearbox away from the mounting plate, until the gear coupling is clear of the mounting plate. The gearbox
can now be lifted out of position.
