Operation & Maintenance, Page
15
of
23
Section
3
– Revision 2.3
Adjustment is achieved by removing packers as follows;
m
Remove the bolts securing the infill box to the side plate.
m
Add or remove necessary packers to give desired cleaning comb clearance. If the infill box needs to be moved out-
wards in order to fit additional packers, it is recommended that lifting equipment be attached to aid in this operation.
m
Refit the existing bolts, (replace with new bolts if too short), which secure the infill box to the side plate. These
bolts must then be re-torqued as stated in T056.
