Skylle 1550 User Manual 20181107V2
|30
14
/
31
This scrolling technique is also used for data input, value input, mode selection, and similar operations.
Examples include: Value, ON, OFF, INH, ACT, etc.
RTN button
Touch the RTN button when you want to open a setup screen or to switch between cursor move mode
(reverse display) and data input mode (box display).
This button can also be used as the enter button screen, etc.
Exiting Setup Screen
To end the operation on a setup screen and return to the menu screen, move the cursor to the screen title item and touch the RTN
button.
To return to home screen directly, touch the S1 button for 1 second. Alternatively, move the cursor to the screen title item and touch
the RTN button to return to the home screen from a menu screen.
Note
:
*Scroll operation: circle your finger on the outer edge of the RTN button. The sensors may mis-read your touch as a reverse
rotation if the circle is smaller, or performed on the inside edge of the RTN button.w
*The Sensor Touch™ may not operate smoothly if your hand is touching the surrounding case parts. Please make sure that the tip of
your finger is actually operating the Sensor Touch™.
*If the Sensor Touch™ does not register your input, please try again after lightly tapping your finger
on the sensor once again.
Do not operate the Sensor Touch™ while wearing gloves. The Sensor Touch™ may not work correctly.
Caution
:
The touch sensor may not operate correctly if spark noise is generated from a gasoline engine, etc.
Please remove the transmitter to a location away from the noise source.
