Skylle 1550 User Manual 20181107V2
|30
25
/
31
AREA SCAN
Click the area scan button
(third icon below the Setting button), and the editing interface will appear.
Camera Selection
Parameter editing interface
1.
AREA SCAN
There are a variety of different camera options to select.
When selecting a custom camera, follow the steps below
to set the parameters:
1.
According to the parameters of the current camera,
input the width and height of the sensor. Input
the width and height of the photo, the camera
focal length, and other basic data. It is suggested
to customize parameters for specific cameras,
eliminating the trouble of inputting parameters every
time;
2.
Image coverage is changeable at front and side
coverage;
3.
Change the angle of the waypoint in the drawing
area by changing the grid angle (0 degrees in the
north);
4.
The turnaround zone is used to control the flight
length of the drone outside the drawing area,
ensuring a complete scan of the drawn area.
5.
Setting the speed to change the flight speed (cm/s)
of the drone during the area scan operation;
6.
Control the resolution of the photo by entering the
altitude of the flight or the ground resolution. The
scanned area shows the current drawing area. The
shooting point shows the approximate number of
photos taken by the current parameter. The trajectory
of the drone aircraft s the white line that appears
after clicking finish scanning.
Selecting the parameter settings
for a custom camera grid
