33
The format of buttons:
NN RESOUR ХХХ
STATION
APPLICATION
where: <NN> – number of station, <STATION APPLICATION> – application of station,
<RESOUR ХХХ> – how many times it is left for a manipulator to revert to a station with
reagent until it has to be changed (resource limit of a reagent), (the limit is set by the
operator within the interval 0-255, default value is 255).
The <STATION APPLICATION> parameter can acquire the following values:
- <DRYING> (only for station No. 1)
- <FLOW> (only for station No. 2)
- <PARKING> (parking station, into which a rack with slides will be loaded). The
parameter is not editable, as the loading of racks is automatic.
- <TECHNOLOGICAL> (station, in which preparations are processed). When a
trough with reagent is assigned to a station, the reagent either has to be chosen
from a list of 64 preprogrammed ones in
Appendix B
or its new name should be
entered (in total up to 96 names).
To edit changeable parameters of configuration (e.g., <MODE> for station No. 1),
press the blue button to the right of the button with the name of a parameter.
The station <DRYER> (station No. 1) has the following configuration parameters
(Fig. 20):
Figure 20. Configuration of station No. 1 <DRYER>.