31
The Stainer lets you program and save up to 32 programs. All programs, including
the preprogrammed ones (factory programs), can be edited. An edited program can be
saved under a new name (as a new program), herewith a message will appear on the
screen:
<SAVE CHANGED PROGRAM
UNDER A NEW NAME?>
If you press the button YES, the edited program will be saved under a new name
and a new PIN. The saved program will be added to the section «PROGRAMMING». If
you press the button NO, it will be needed to enter the PIN, which was entered before in
the course of new program saving.
Figure 18. The PIN entering screen (saving changes in program under old name).
After PIN entering, press the button ENTER, and the Stainer will return to the main
menu. If the newly entered PIN was correct, after pressing the button START OF
PROCESS on the screen will be message, offering to save the edited program under the
previous name:
<PROGRAM WAS CHANGED
SAVE THE CHANGES?>
If you press the button YES, the edited program will be overwritten.
If you press the button NO, the edited program will be launched, but after you
switch off the Stainer, the changes will not be saved.
Before programming a new program, it is rational to define, which reagents will be
used, to count the number of technological operations, to think over how to arrange