28
Enter the name of the new program and press the button ENTER to switch to the
screen of program editing. If the entered name is unique, i.e., it has not been entered
before, a template of a new program (Fig. 14) with the already given number of operations
appears on the screen. Otherwise, the Stainer will suggest entering a different name.
Figure 14. Sample of a new program DEMO-4 (4 technological operations).
Programming is performed by editing the template:
- Set a reagent for each technological operation.
(<DRYER> (drying and
heating) and <BLOTTER> (removal of liquid from a rack and slides’ ends) are
conventionally regarded as reagents). To start editing, touch the screen at the spot of the
parameter, which you need to edit. Then perform editing by selecting reagents from the
list. To enter a new reagent, press the button NEW (reagents screen No. 5). The
manufacturer’s list of reagents is given in
Appendix B
.
Figure 15. Screen of reagent selection No. 1 (in total up to 6 screens ).