38
5.3.2 Menu section «SERVICE». Performing of service functions.
To access the menu of service functions, press the button SERVICE (Fig. 25):
Figure 25. Service functions menu.
POSITIONING TEST – check of the working capacity of the Stainer and its accessories (test
positioning program). The program is designed to check the mutual positioning of
accessories and the manipulator. The test program is recommended for the commissioning
of the Stainer
(Item 6.3) and the identification of faulty accessories.
WATER SUPPLY – PROGRAMMED
WATER SUPPLY – CONTINUOUS – is intended
to set the mode of water supply into the flow-through trough.
- <PROGRAMMED> – water supply turns on automatically as soon as the rack is
positioned at the flow-through trough,
- <CONTINUOUS> – water supply to the flow-through trough is on all the time.
To switch between modes, press the button.
ACCEPTANCE TEST – service section for acceptance tests, which is protected with a
password. The section is used by engineering personnel of the manufacturing company and
by personnel of certified testing centers during tests. This mode is unavailable for lab
personnel.
SOFTWARE VERSION
– version of the software appears on the screen when the button is
pressed.
TECH. PROGRAMS RELOADING
SOFTWARE RELOADING