28
Enter the name of the new program and press the button ENTER to switch to the
screen of program editing. If the entered name is unique, i.e., it has not been entered before,
a template of a new program (Fig. 15) with the already given number of operations appears
on the screen. Otherwise, the Stainer will suggest entering a different name.
Figure 15. Sample of a new program DEMO-4 (4 technological operations).
Programming is performed by editing the template:
- Set a reagent for each technological operation.
(<DRYER> (drying and heating)
and <BLOTTER> (removal of liquid from a rack and slides’ ends) are conventionally
regarded as reagents). To start editing, touch the screen at the spot of the parameter, which
you need to edit. Then perform editing by selecting reagents from the list. To enter a new
reagent, press the button NEW (reagents screen No. 5). The manufacturer’s list of reagents
is given in
Appendix B
.
Figure 16. Screen of reagent selection No. 1 (in total up to 6 screens).