MK Products CobraTig 150 SM, Руководство пользователя

Страница: 25 / 29

CobraTig
®
150 Owner's Manual - Page 18
Increase S/N
This button will INCREASE the starting serial number of the next orbital
weld. The serial number is incremented before every weld, so use one
number less than actual number of next weld.
Higher Contrast
Press this button to increase the contrast for the LCD screen. This will
make the display darker as the number increases.
Change Units
Press this button to toggle units from INCHES to METRIC. It will
only affect the screen display when using AUTO PROCEDURE
GENERATION, see MAIN MENU.
Change Sound
Press this button to enable or disable sound.
Change Click
Press this button to enable or disable button clicks.
Change Light
This toggles the LCD backlight either ON or OFF. The AUTO setting will
sense ambient light and change the backlight to adjust accordingly.
Lower Contrast
Press this button to decrease the contrast for the LCD screen. This will
make the display lighter as the number decreases.
Section 16 Diagnostic Menu
This screen will show the units internal total on-time diagnostics. This
includes number of times unit was powered on, the total on-time, the number
of welds performed, total arc time and number of times a weld procedure was
saved.
Help
Press this button to read a brief description of the DIAGNOSTIC MENU
button descriptions and functions.
Main Menu
Press this button to return to the MAIN MENU.
Pressing each of the buttons below, will change the display settings of the
TIME/DATE stamp within the CobraTig unit. The TIME/DATE stamp will
show on the MAIN MENU display screen and at the bottom of every Post-
Weld, Weld Deviation or Printed Chart page.
For each field below, a subsequent button press will increase the value range
by one. Once the end of the range is reached, that field sequence will roll-
over and start again.
12/24H Clock
Pressing this button will toggle the AM or PM from the screen and
change the hour of the day, from 1-12 to 0-23, and back.