MK Products CobraTig 150 SM, Руководство пользователя

Страница: 18 / 29

CobraTig
®
150 Owner's Manual - Page 11
If the current procedure is to be saved at this location, press “YES”. If
this location is to be emptied, and the saved weld procedure erased,
press “EMPTY ONLY”. If nothing is to be done with this location, and
you need to return to the SAVE PROGRAM MENU, press “NO”.
Scroll Right
Each time this button is pressed, the locations of where each weld
procedure is saved or can be saved to, will move three numbers to the
right.
Those locations with the word EMPTY above the number, indicate that
there is no weld procedure saved in that location.
Weld Mode
Pressing this button will toggle the high voltage arc starter from the
prompt READY TO WELD (high voltage enabled) to READY TO TEST
(high voltage disabled). This toggle is visible at the bottom of the WELD
ORBITAL screen.
Scroll Down
Press this button in order to scroll the highlighted field from one
DEMAND parameter down to the next. Adjustment of each parameter is
performed using the ADJUST UP or ADJUST DOWN buttons.
Adjust Down
After the SCROLL UP or SCROLL DOWN buttons have been used to
select a parameter to be modified, press the ADJUST DOWN button to
decrease the numerical value of that parameter.
As this button is pressed for each parameter a vertical bar graph shows
the decreasing value, both numerically and in height of the bar graph.
For most parameters, a minimum value is obtained once the vertical bar
graph has reached the bottom of the scale. There is also a change in
the sound once the minimum has been reached, from a single ‘beep’ to a
triple ‘beep’.
Section 11 Auto Program Generator
From the main menu screen press Auto Prog. The ease of using the
CobraTig 150 SM comes primarily from this feature. By simply inputting